The GLAMORCA reverse osmosis system produces optimal water for marine and freshwater aquariums.
Integrated deionization filter!
The GLAMORCA reverse osmosis system is equipped with an additional cartridge after the membrane to remove the smallest residues of silicates and nitrates. It is thus possible to obtain a water with a retention rate of more than 99%, with a total dissolved solids TDS close to 0 or even 0.
Water quality in real time!
The GLAMORCA reverse osmosis system informs in real time about the quality of the produced osmosis water, TDS in ppm, thanks to its LCD display.
Filter changes are easy!
Changing the filter of the GLAMORCA reverse osmosis system is child's play. The integrated LED filter change indicator informs you when it is time to replace a filter cartridge. The filter cartridges or the membrane can be replaced in a jiffy.
Only 15cm wide!
With a width of only 15 cm, the GLAMORCA reverse osmosis system can be easily integrated into a cabinet.
Up to 380 L / day!
The GLAMORCA reverse osmosis system produces up to 380 liters of osmosis water per day, under optimal conditions.
With water leak sensor!
For maximum safety, the GLAMORCA Reverse Osmosis System has been equipped with a water leak sensor. If a leak is detected, an alarm sounds and the reverse osmosis system stops operating.
TECHNICAL SPECIFICATIONS
Input voltage: 110 - 240V / 50 - 60Hz – 1.5A
Output voltage: 24V – 1.5A
Filtering levels: 5 levels
Production of pure water in 24h at 25°C: ≈ 100 GPD (380 L / day)
Wastewater per liter of produced water: ≈ 1.25 L
Maximum dissolved input solids in TDS: ≤ 2000ppm
Inlet pressure: 0.5 - 4 bars
Inlet temperature: 4 - 45°C
Max. Chlorine content at the membrane inlet: ≤ 0.1ppm
Dimensions: H 39 cm x W 41 cm x D 15 cm
Weight: 8.8 kg
Delivered with the union female adapter - tapped 3/4 '' - Push in 1/4 ''
The active carbon filter removes volatile organic chemicals (VOC), pesticides, herbicides, chlorine and many other harmful chemicals.
The deionization filter makes it possible to produce a water of very high purity; this step makes it possible to remove the Anions and Cations still present in the water after passing the membrane. Very effective, it will allow you to obtain a rate of TDS close to 0 and a possible conductivity of 0.1μm. Ideal values for reef aquarium!
Sediment filter removes sediment particles such as sand, silt, dirt, rust and other impurities down to nominal size of 5 micron.
The reverse osmosis membrane filter removes 99,9% of chemicals, dissolved solids, metals, bacteria and viruses from the water.
The carbon block filter removes impurities such as chlorine, organic contaminants, pesticides and other chemicals. It eliminates or reduces unwanted tastes, colors and odors of water and protects the membrane.
Do not use where the water is microbiologically unsafe or an unknown quality. It is essential that operation, maintenance and filter replacement requirements be carried out as scheduled so that the system can perform to its optimum ability.
https://www.youtube.com/watch?v=PF83TY3C2B8